Under what circumstances need to replace the stainless steel filter element to maximize its effect. Stainless steel filter is divided into sintered mesh filter, sintered felt filter, stainless steel mesh folding filter, etc., when used for a period of time after the need to clean up the impurities in the filter to avoid causing failure to reduce its service life.
1. When the filter is working for a period of time, especially under severe working conditions, certain impurities are precipitated in the filter element of the stainless steel sintered felt. At this time, the pressure drop will increase and the flow rate will decrease. It is necessary to remove the impurities in the filter element of the sintered felt in time. ;
2. If the stainless steel wire mesh is found to be deformed or damaged, the stainless steel folded filter element must be replaced immediately.
3. When cleaning impurities, special attention should be paid to the fact that the stainless steel wire mesh on the filter core must not be deformed or damaged (stainless steel sintered wire should also pay attention to surface cleaning), otherwise, the filter installed on the filter can not meet the design requirements for the purity of the filtered medium. Equipment such as compressors, pumps, meters, etc. will be damaged;
4. The core part of the filter is the filter core part. The filter core consists of a filter frame and a stainless steel wire mesh. The stainless steel wire mesh is suitable for damage and needs special protection;
If there are impurities in the filter element in the filter, it will cause obvious damage to the filter. I hope that our summary of these factors will help everyone.